#waxcarving Instagram Photos & Videos

waxcarving - 88.8k posts

Top Posts

  • 117 3 15 hours ago
  • 드디어 끝났습니다. 개인적으로 작업물에서 제일 추구하는게 잘 빠진 라인인지라 처음 뱀 꼬인 형태 잡는 것 부터 꽤 많은 시간이 걸렸습니다. 후로는 뱀피 입히기, 마지막 약간은 충동적으로 결심한 반지 내부까지 뱀 패턴 입히는 걸로 하여금 그 어떤 과장 없이 20번 이상 부러졌고 만족스럽지 않은 부분은 30번 가량 쌓아 올려 재작업 했습니다. 마무리 하고 나서도 여기저기 더 욕심내고 싶은 부분이 눈에 들어오나 이번에 또 부러지면 세 덩어리가 아닌 그 이상일 것을 감지하기에 마무리 합니다. 제품이라고 생각하기 보다는 그림 그릴 때 처럼 작품이라는 인식으로 작업했기에 욕심도 더 컸고, 끝내는데 조급 해 하기 보다는 내 페이스대로 하나하나 그려 나갔습니다.
결론은.....! 즐거웠다/이런 뱀 본 적 없을 것이다/잘빠졌다/나는 아직 꽤나 부족하다 더 시간투자하고 노력하쟈🤘🏻
.
.
.
#완성 #뱀 #세마리 #작업 #작품 #과정 #왁스카빙 #공방 #반지 #핸드메이드 #실버 #주얼리 #waxcarving #silver #handmade #ring #design #fashion #ring #accessories #jewelry #snake
  • 드디어 끝났습니다. 개인적으로 작업물에서 제일 추구하는게 잘 빠진 라인인지라 처음 뱀 꼬인 형태 잡는 것 부터 꽤 많은 시간이 걸렸습니다. 후로는 뱀피 입히기, 마지막 약간은 충동적으로 결심한 반지 내부까지 뱀 패턴 입히는 걸로 하여금 그 어떤 과장 없이 20번 이상 부러졌고 만족스럽지 않은 부분은 30번 가량 쌓아 올려 재작업 했습니다. 마무리 하고 나서도 여기저기 더 욕심내고 싶은 부분이 눈에 들어오나 이번에 또 부러지면 세 덩어리가 아닌 그 이상일 것을 감지하기에 마무리 합니다. 제품이라고 생각하기 보다는 그림 그릴 때 처럼 작품이라는 인식으로 작업했기에 욕심도 더 컸고, 끝내는데 조급 해 하기 보다는 내 페이스대로 하나하나 그려 나갔습니다.
    결론은.....! 즐거웠다/이런 뱀 본 적 없을 것이다/잘빠졌다/나는 아직 꽤나 부족하다 더 시간투자하고 노력하쟈🤘🏻
    .
    .
    .
    #완성 #뱀 #세마리 #작업 #작품 #과정 #왁스카빙 #공방 #반지 #핸드메이드 #실버 #주얼리 #waxcarving #silver #handmade #ring #design #fashion #ring #accessories #jewelry #snake
  • 263 23 16 March, 2019

Latest Instagram Posts

  • ❤
목걸이를 잔뜩 만들어야겠다😊
좀 두꺼운 목걸이도 만들고싶어!
살짝 힐링 좀 하다 작업하러가야지😄
@usomegood_official -
■spacecraft necklace■
■square necklace■
■4mm simple earrings■

  • 목걸이를 잔뜩 만들어야겠다😊
    좀 두꺼운 목걸이도 만들고싶어!
    살짝 힐링 좀 하다 작업하러가야지😄
    @usomegood_official -
    ■spacecraft necklace■
    ■square necklace■
    ■4mm simple earrings■
  • 11 2 18 minutes ago
  • Have you ever wondered how a pattern for sand casting is designed and made.

Since patterns must be able to push straight in and pull straight out without disturbing the clay / sand they can't have undercuts. This flower is the perfect example and is now ready to be vacuum cast in bronze, hand finished, rubber molded, and then mass produced by vacuum casting. Once multiples are cast, they will go through a 50 - 60 hour vibratory tumbling system before finally being ready to sell.
#sandcasting #castingpattern #bronzecasting #diycastings #diyjewelry casting #benchjeweller #waxcarving #investmentcasting
  • Have you ever wondered how a pattern for sand casting is designed and made.

    Since patterns must be able to push straight in and pull straight out without disturbing the clay / sand they can't have undercuts. This flower is the perfect example and is now ready to be vacuum cast in bronze, hand finished, rubber molded, and then mass produced by vacuum casting. Once multiples are cast, they will go through a 50 - 60 hour vibratory tumbling system before finally being ready to sell.
    #sandcasting #castingpattern #bronzecasting #diycastings #diyjewelry casting #benchjeweller #waxcarving #investmentcasting
  • 5 0 35 minutes ago
  • Have you ever wondered how you could build a wax injector that was both inexpensive and worked properly too?

Here's a design that I created for those on a budget that works like a dream. 
The main components consist of 1) a $10 crock pot from the department store like Target or Walmart. The two temp model is best. 2) also needed is a metal meat injector which is sold at Target for about $14. Just cut off the tubing part of the tip and add a rubber cone washer from the plumbing Dept of a hardware store. This rubber tip is really important because it seals against the mold and keeps all pressure shooting in instead of everywhere else. 3) I also recommend a grilling thermometer which costs about $6. Walmart carries one with a rubber cover that is red and matches the Crock-Pot. 
There are other parts that can be added as well and for full directions on how to build them just go to my website at www.diyjewelrycasting.com and look under tutorials.

Okay, that's it and I'm positive you'll be pleasantly surprised by how good it actually works.
#waxinjection #waxcarving #customjewelry #makejewelry #benchjeweler #jewelrytools #letsmakejewelry
  • Have you ever wondered how you could build a wax injector that was both inexpensive and worked properly too?

    Here's a design that I created for those on a budget that works like a dream.
    The main components consist of 1) a $10 crock pot from the department store like Target or Walmart. The two temp model is best. 2) also needed is a metal meat injector which is sold at Target for about $14. Just cut off the tubing part of the tip and add a rubber cone washer from the plumbing Dept of a hardware store. This rubber tip is really important because it seals against the mold and keeps all pressure shooting in instead of everywhere else. 3) I also recommend a grilling thermometer which costs about $6. Walmart carries one with a rubber cover that is red and matches the Crock-Pot.
    There are other parts that can be added as well and for full directions on how to build them just go to my website at www.diyjewelrycasting.com and look under tutorials.

    Okay, that's it and I'm positive you'll be pleasantly surprised by how good it actually works.
    #waxinjection #waxcarving #customjewelry #makejewelry #benchjeweler #jewelrytools #letsmakejewelry
  • 9 1 1 hour ago
  • 짠! 결혼반지 착샷 🥰❤
  • 짠! 결혼반지 착샷 🥰❤
  • 43 4 4 hours ago
  • Some projects that are almost ready to cast  #batman
  • Some projects that are almost ready to cast #batman
  • 55 2 7 hours ago
  • Hello les ami(e)s !  Pour fêter l'arrivée du printemps je vous offre une super réduction de 21 % sur toute commande passée sur mon site uniquement ce jeudi 21 mars 2019. Code promo = SPRING19
Profitez-en pour (re)découvrir ma collection en ligne et vous faire plaisir 😉
https : //www.jrjewelry.eu
  • Hello les ami(e)s ! Pour fêter l'arrivée du printemps je vous offre une super réduction de 21 % sur toute commande passée sur mon site uniquement ce jeudi 21 mars 2019. Code promo = SPRING19
    Profitez-en pour (re)découvrir ma collection en ligne et vous faire plaisir 😉
    https : //www.jrjewelry.eu
  • 14 1 9 hours ago
  • Last three Tiki rings of winter.
  • Last three Tiki rings of winter.
  • 68 2 10 hours ago
  • Finished up these two sea turtle keychains for a customer. Also just got an order for a pair of sea turtle cufflinks. Funny how certain designs seem to sell around the same time even though from different customers on different unrelated shops.👍😆 #seaturtle #seaturtlejewelry #seaturtlekeychain
  • Finished up these two sea turtle keychains for a customer. Also just got an order for a pair of sea turtle cufflinks. Funny how certain designs seem to sell around the same time even though from different customers on different unrelated shops.👍😆 #seaturtle #seaturtlejewelry #seaturtlekeychain
  • 28 4 12 hours ago
  • Day 20 #marchmeetthemaker is "design process" It starts with a random "what if" brainwave and then I do some doodles/ sketches and then I move into wax. Luckily the sketches are just for me so that don't have to be very accurate, just inspiring! 😁 Ideas can pop into my head at any moment so I'm never very far from a pen and paper.✏️✍️ When I move into carving the wax I kind of let it tell me what to do and go with it...sometimes it's what I planned, other times it's a happy accident! But if I like it it becomes silver, and if I don't I just start again 🙊
#drawingaday #oodlesofdoodles #sketchbook #creativeprocess
  • Day 20 #marchmeetthemaker is "design process" It starts with a random "what if" brainwave and then I do some doodles/ sketches and then I move into wax. Luckily the sketches are just for me so that don't have to be very accurate, just inspiring! 😁 Ideas can pop into my head at any moment so I'm never very far from a pen and paper.✏️✍️ When I move into carving the wax I kind of let it tell me what to do and go with it...sometimes it's what I planned, other times it's a happy accident! But if I like it it becomes silver, and if I don't I just start again 🙊
    #drawingaday #oodlesofdoodles #sketchbook #creativeprocess
  • 19 1 12 hours ago
  • All finished with a big casting of over 80 pieces.😳 I had not done a casting since Christmas time depleted a lot of my stock. Now back to creating orders and starting on carving some new designs! 🤗🤗 #silvercastings
  • All finished with a big casting of over 80 pieces.😳 I had not done a casting since Christmas time depleted a lot of my stock. Now back to creating orders and starting on carving some new designs! 🤗🤗 #silvercastings
  • 44 3 13 hours ago
  • 117 3 15 hours ago
  • |
STONE L RING FOR HER
Available Online
WWW.OSS-OSS.COM
.
.
30% OFF
Until March 24th
  • |
    STONE L RING FOR HER
    Available Online
    WWW.OSS-OSS.COM
    .
    .
    30% OFF
    Until March 24th
  • 67 1 15 hours ago
  • #enchant#ring#✨
.
.
.
@burn_anchor
https://blog.naver.com/brennenanker
92.5silver/Silver Design
디자인&주문제작/ ⚓️커스터마이징⚓️
문의 DM / wonjun528@gmail.com
Kakao ID-wonzun528
+82 10 5277 7011
⚓️번 앵커의 모든 제품은 디자인 등록 및 출원제품입니다⚓️
  • #enchant #ring #✨
    .
    .
    .
    @burn_anchor
    https://blog.naver.com/brennenanker
    92.5silver/Silver Design
    디자인&주문제작/ ⚓️커스터마이징⚓️
    문의 DM / wonjun528@gmail.com
    Kakao ID-wonzun528
    +82 10 5277 7011
    ⚓️번 앵커의 모든 제품은 디자인 등록 및 출원제품입니다⚓️
  • 45 7 17 hours ago
  • 마음에드는 고리가 없어서.. 오벌고리 제작 :)
.
.
#왁스카빙
  • 마음에드는 고리가 없어서.. 오벌고리 제작 :)
    .
    .
    #왁스카빙
  • 56 6 18 hours ago
  • 本日は春らしく随分と暖かい1日でした^_^
ご来店頂いたお客様、ありがとうございます^_^
暖かくなってきたので、そろそろ良いんじゃ無いかと、オーダーのwave ringを作りました。
明日は祝日ですね!沢山のご来店お待ちしております^_^

#azizi #handmade #ring #wave #waxcarving #指輪 #ウェーブ #ハンドメイド #富山
  • 本日は春らしく随分と暖かい1日でした^_^
    ご来店頂いたお客様、ありがとうございます^_^
    暖かくなってきたので、そろそろ良いんじゃ無いかと、オーダーのwave ringを作りました。
    明日は祝日ですね!沢山のご来店お待ちしております^_^

    #azizi #handmade #ring #wave #waxcarving #指輪 #ウェーブ #ハンドメイド #富山
  • 29 0 19 hours ago
  • carving mini keys today
  • carving mini keys today
  • 14 1 19 hours ago